#15 NYLON BARRIER NETTING
Mesh Properties

 

LFS #15 Nylon Barrier Netting System

Component Specifications/Tolerance

Netting Component:

  • 100% industrial high grade nylon
  • U.V. treated yarn
  • 3 Strand twisted & knotted construction
  • 1” mesh size
  • Dyed black and tarred
  • 125-lb. single strand tensile strength

Attachment Twine / Hanging Twine:

  • #48 braided polyester twine
  • 375 lb. Tensile strength
  • Dye treated

Perimeter Border Ropes & Riblines:

  • Braided synthetic cover
  • Parallel synthetic core
  • 3,500 lb. Tensile strength
  • 2,455 Wet abrasion cycles

 

LFS #15 Nylon Golf Range Netting System Specifications

Netting: LFS #15 nylon golf range netting with average 125 lb. twine tensile strength.
2” stretched mesh; 1” single bar measure, twisted-knotted construction, manufactured
with U.V. treated yarn and additionally dyed black and tarred.

All sections of netting component to be constructed to a 3/8” braided black perimeter
rope, minimum 3,500 lb. breaking strength. Additionally, net panels shall have internally
constructed vertical and horizontal ropes of the same material. All rope locations on the
net panels shall correspond to the as built net panel suspension and support cables
constructed to pole structures. All net panels shall be custom fabricated to as built
measurements of the pole/cable structure to provide a taut panel upon completion.

Attachment of net and rope components shall be made with #48 braided polyester
twine, minimum 375 lb. tensile strength, treated black. The attachment twine shall
continually encompass the netting component and be tied to the rope component via a
clove and one half hitch knot +/- 6 inches on center, never to exceed 8 inches on center.

Finished net panels shall be suspended to cables by the rope component via a
9/32” cadmium plated steel carabiner attachment snap, minimum 1,140 lb. breaking
strength. The interior of the snap shall encompass only the rope and cable components
when suspension is completed. The interval between snap to cable attachment points
shall not exceed 3 feet on center (snap size may vary to fit cable size(s) specified).

Netting system is available from LFS, Inc., Bellingham, WA, 800-426-8860, or engineers
approved equal.