HOLIDAY PROMO!

20% Off Knotted Nylon Golf Cage Net with Pre-Installed Baffle & FREE SHIPPING on all pre-fabricated products!

#36 Nylon Barrier Netting

Mesh Properties

Description of the first photo
Description of the second photo

 

Component Specification / Tolerance

Netting Component:

  • Dupont type 66 high grade nylon
  • U.V. treated yarn
  • 3 Strand twisted & knotted construction
  • 3.5 inch stretch mesh / 1.75 inch opening
  • Dyed black and urethane bonded
  • 325.6 lb. Average single mesh break strength 1
  • Weight factor: 26.5 square feet = 1-lb.

Attachment Twine / Hanging Twine:

  • #48 braided polyester twine
  • 375 lb. Tensile strength
  • Dye treated

Perimeter Border Ropes & Riblines:

  • Braided synthetic cover
  • Parallel synthetic core
  • 3,500 lb. Tensile strength
  • 2,455 Wet abrasion cycles

Five year pro-rated limited warranty²

1.) Mesh strength based upon most recent independent lab testing reports, per ISO 1806. Report copies are available upon request.

2.) Some exclusions and limitations do apply. Warranty document is available upon request.

 

Specifications

#36 3 ½” stretched mesh (1 ¾” bar measure), twisted knotted nylon netting with an average 325.6 Lb. single mesh breaking strength. 100% Dupont type 66 high grade nylon, Manufactured with U.V. treated yarn and additionally coated with a black resin dye and urethane bonding treatment.

All sections of netting component to be constructed to a 3/8” braided black perimeter rope, minimum 3,500 lb. breaking strength. Additionally, net panels shall have internally constructed vertical and horizontal ropes of the same material. All rope locations on the net panels shall correspond to the as built net panel suspension and support cables constructed to pole structures. All net panels shall be custom fabricated to as built measurements of the pole/cable structure to provide a taut panel upon completion.

Attachment of net and rope components shall be made with #48 braided polyester twine, minimum 375 lb. tensile strength, treated black. The attachment twine shall continually encompass the netting component and be tied to the rope component via a clove and one half hitch knot +/- 6 inches on center, never to exceed 8 inches on center.

Finished net panels shall be suspended to cables by the rope component via a 9/32” cadmium plated steel carabiner attachment snap, minimum 1,140 lb. breaking strength. The interior of the snap shall encompass only the rope and cable components when suspension is completed. The interval between snap to cable attachment points shall not exceed 3 feet on center (snap size may vary to fit cable size(s) specified).

Netting system shall be accompanied by a five year pro-rated manufacturer’s warranty. Netting system is available from LFS, Inc., Bellingham, WA 800-426-8860, or engineers approved equal.